The ProTAACS Ethernet Gateway allows your ProTAACS Wireless Sensors to communicate with the Online Wireless Sensor
Monitoring and Notification System without the need for a PC. Simply
plug this device into any open network port with internet connection and
it will automatically connect with our online servers. The device will
buffer up to 16,000 sensor data messages in on-board memory in the event
of an internet connection interruption. When internet communication is
re-established the sensor data will download to the ProTAACS online
The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.
|Data Capturing Options|
Data collected by the ProTAACS Ethernet Gateway from
the sensors in the network can be accessed when these interfaces are
turned on. Multiple interfaces can be active at the same time. All
interfaces require that the sensor gateway be set to a Static IP
address. (By default, the unit uses DHCP).
SNMP Poll and Trap Interface
Use SNMP software to pull in gateway and sensor data. ProTAACS provides a MIB File.
MODBUS TCP Interface
Use MODBUS TCP software to pull in gateway and sensor data. ProTAACS provides a register map.
Real Time TCP Interface
Poll on the gateway’s assigned port to retrieve gateway and sensor data.
|What's in the box|
- Sensor Gateway
- Super High Gain Antenna
- Power Supply
- Ethernet Cable
- Sensor Gateway Quick Start Guide
|Wireless Ethernet Gateway
||16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
||139.85 x 101.75 x 34.95 mm
||-20 to +85 °C (-4 to 185 °F)
||SMA: 5.0 dBi Gain
||-10 to +70 °C (14 to +158 °F)
||10/100 Ethernet Controller
||Full- and Half-Duplex
||Pre-programmed MAC Address
||UDP, DHCP, TCP, SNMP, MODBUS
|433 MHz Specifications
||433 MHz Operating Frequency
||CE Certified and Complies with CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05)