Previous

ProTAACS Wireless RF Local Alert

ProTAACS Wireless RF Sensor Gateway - Ethernet

     0 reviews  |  Write a review
Brands ProTAACS
Product Code: EG-PSG
Availability: Pre-Order

Available Options

Qty

Have a question?

The ProTAACS Wireless RF Sensor Gateway - Ethernet allows your ProTAACS Wireless Sensors to communicate with the Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the ProTAACS online system.

The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.

Data Capturing Options

Data collected by the ProTAACS Ethernet Gateway from the sensors in the network can be accessed when these interfaces are turned on. Multiple interfaces can be active at the same time. All interfaces require that the sensor gateway be set to a Static IP address. (By default, the unit uses DHCP).

SNMP Poll and Trap Interface
Use SNMP software to pull in gateway and sensor data. ProTAACS provides a MIB File.

MODBUS TCP Interface
Use MODBUS TCP software to pull in gateway and sensor data. ProTAACS provides a register map.

Real Time TCP Interface
Poll on the gateway’s assigned port to retrieve gateway and sensor data.

What's in the box
  • Sensor Gateway
  • Super High Gain Antenna
  • Power Supply
  • Ethernet Cable
  • Sensor Gateway Quick Start Guide
Wireless Ethernet Gateway
Device Memory 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
Dimension 139.85 x 101.75 x 34.95 mm
Storage Temperature -20 to +85 °C (-4 to 185 °F)
Enclosure Material ABS plastic
Antenna Type SMA: 5.0 dBi Gain
Operating Temperature -10 to +70 °C (14 to +158 °F)
Hardware 10/100 Ethernet Controller
Operation Full- and Half-Duplex
Cross-Over Correction Automatic MDI/MDI-X
Addressing Pre-programmed MAC Address
Default Port 3000
Protocols Supported UDP, DHCP, TCP, SNMP, MODBUS
433 MHz Specifications
Operating Frequency 433 MHz Operating Frequency
Certifications CE Certified and Complies with CISPR 22:2008-09 / EN 55022:2010 - Class B and ETSI EN 300 220-2 V2.4.1 (2012-05)

Write a review

Please login or register to review